Jeio Tech TH-TG Temperature & Humidity Chamber

Overview

Economy environmental test chamber.
Stability test in accordance with ICH guidelines Q1A (R2)
Models: TH-TG-180/300/408/800/100/1500

Control range
Temperature range from -5 to 100°C Humidity range from 10* to 95% RH (20% for TH800-1500)

Performance

• Microprocessor PID control / Temperature calibration / Automatic tuning.
• Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
• Water recycling system reduce water consumption for longer operation.
• Air-tight door closure with perfect sealed packing.
• - Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
• - Two-point door latch also enhances tightness to door closure.
• Energy efficiency is achieved by optimization of the insulation system.
• - Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.

Safety

• Built in door lock with a key.
• Automatic shut off after overheat alarm.
• Low and empty water level alarm.
• Power supply leakage breaker.
• Over current protection.
• Open door alarm.

Convenience

• Spacious chamber volume with a maximum capacity of 1500L.
• - Various volume sizes, available to suit any users’ need.
• Corrosion resistance stainless steel chamber and electric polished humidification tank.
• Maintenance of water supply are easily performed with a front water tank.
• - Portable water container makes supplying water convenient.
• Water supply during operation is also available for long term test purposes.
• Direct water system provides user great convenience when performing long-term tests. (optional)
• Clear observation of samples.
• - Tempered glass door with built in heating wire.
• - Energy efficient, long life span LED lighting.
• - Wider view, inner glass door is available for monitoring of samples. (optional)
• Cable port for introduction of external probes or wires.
• - 50mm diameter cable port comes standard on the left side of the unit.
• - Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
• Casters for easy mobility during installation or relocation.
• User friendly LCD controller.
• - Colorful interactive touch type LCD controller.
• - Set point temperature and present temperature are clearly shown together on display.
• - Sufficient programmable control support.
• - Operating progress can be shown in graph mode for better data understanding.
• - Automatic start/stop can be programmed for unattended operations.
• - Display indicates abnormal temperature changes or power failures.
• - Selective bilingual language support.
• (Korean / English or English / Chinese, selectable only when placing an order)
• - Temperature and other operating parameters can be recorded using a six channel digital recorder.(optional)

Computer interface.

• RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
• Program patterns are simple to set with the use of our software.
• Easy to check status of real-time operations. Graph data supports easy understanding.
• Storage and documentation of programs.
• Data with saving capabilities in excel and text format.
• Storage of program information, backup of value settings, recovery, and temperature values.
• RS-232 communication port as standard offer.

* Even though the max. segments per pattern are 100, the total available segments are up to 6000 not 10000, therefore arrangement of the number of segment and patterns will need to be done properly.

PLEASE NOTE: All Jeio Tech environmental chambers are manufactured to order. A lead time of approximately 12 weeks should be expected.

Some accessories are factory install only and must be ordered at time of Incubator purchase for factory installation at time of manufacture.

Key Attributes

Manufacturer Specifications