Laboratory Supply Network is open and operational during the COVID-19 pandemic. You can find updates pertaining to any supply chain issues in this post.

CO2Cell Incubators

Category CO2 Incubators
Manufacturer BMT USA
Country of manufacture Germany / Czech Republic
Overview

BMT CO2Cell incubators are focused on constant and repeatable conditions for cell growth, tissue and other culturing procedures. The Direct Heat system is fan-less,virtually eliminating cross contamination, condensation and consequently vibration. Thanks to the unique 6-sided-3 circuit direct heated chamber contamination control and condensation on the inner glass door and walls is achieved and maintenance is greatly reduced. The Drift-free Rsensor provides maximum reliability, precision and quick recovery after door opening.

Special options available: the world's highest decontamination cycle of 200°C, a Tri-Gas CO2 and N2 model, and a stacked version.

CO2CELL

BMT™s CO2CELL series Incubators are suitable for research and growth of cell cultures and other cultures where a protective CO2 atmosphere or O2 or CO2 atmosphere is desired. The CO2 Incubators are available in either 1.71ft3 (50 liter) or 6.71 ft3 (190 liter) chamber volumes. 

Features Include:

  • Chamber volume: 50 and 190 liters
  • Working temperature: From 5°C above ambient temperature up to 60°C
  • Uncontrolled relative humidity: Up to max. 95% RH at 37°C
  • CO2 concentration: From 0.1 to 20%
  • CO2 measurement with an infrared sensor
  • Comfort: Stainless steel DIN 1.4571 (AISI 316)
  • Large, Color Touch Screen 3.6", glove friendly
  • Contamination risk avoided by no fan use
  • Relative humidity up to 95% RH at 37 °C
  • Microprocessor control
  • CO2 concentration: 0.1 up to 20%
  • Event log of all relevant data and events
  • Anti-microbiological paint
  • 3 stainless steel trays included in 50 l
  • Acoustic and visual alarm
  • BMS Relay Contact Alarm
  • 4 stainless steel trays included in 190 l
  • Passwords for users (5 users, 1 admin)
  • Indication of actual temperature value and CO 2 - concentration,
  • Operation via touch screen display
  • Infrared drift-free CO2 sensor alarms and diagnostic values
  • Seamless inner chamber w/ rounded corners
  • Internal glass door
  • HEPA filter on incoming CO2 / N2 tubing
  • Processes and error analysis
  • 25 mm (1") access port in the back of machine
  • RS232 comunication port
  • SD Card system for process data storing
    Key Attributes
    Cu ft. 1.71, 6.71
    Max Temp 60°C
    Min Temp Ambient +5°C
    Temp Uniformity ± 0.1°C
    Interior Outlets No
    Alarms Yes
    Datalogging Capable Yes
    Warranty (years)  2yrs parts, 1 yr labor
    Site Floor, Stackable
    Weight (lbs) 110, 240

     

    Manufacturer Specifications  
    Technical Data Model 50 190
    Interior dimensions
    Chamber: Stainless Steel
    volume ft3 1.71 6.71
    liters 50 190
    width inches 15.83 24.88
    mm 402 632
    depth inches 11.81 17.32
    mm 300 440
    height inches 15.83 27.01
    mm 402 686
    Exterior dimensions width inches 21.02 30.12
    mm 534 765
    depth inches 18.11 28.90
    mm 460 743
    height inches 28.23 30.12
    mm 717 686
    Weight

    Net Standard / Comfort
    Gross Standard / Comfort

    Kg / lbs
    Kg / lbs
    38/40kg 83.8/88.2 lbs
    50/52kg 110.2/114.6 lbs
    94.5/104kg 208/229 lbs
    109/117.5kg 240/259 lbs
    Shelves: stainless steel number of shelf maximum 3 8
    guides in chamber
    side walls standard 3 4
    Electric parameters maximum output W 350°C / 950 °C 380°C / 1800 °C
    consumption @ 37°C kWA <0.07 <0.058
    50/60 Hz V 110-120V
    Temperature Data working temperature °C 1°C above ambient to 50°C
    Temperature deviations at 37°C max. measurement ± °C ≤ 0.1 ≤ 0.1
    spatially ± °C ≤ 0.25 ≤ 0.25
    in time ± °C ≤ 0.1 ≤ 0.1
    Recovery rate % / min. ≥ 0.8% / min. ≥ min 0.8% / min.
    Required CO2 pressure bar / psi 0.3 - 0.7 bar / 5 - 10 psi
    Relative Humidity humidity dish volume ft3 0.02 0.05
    l 0.5 1.5
    Humidity level @ 37°C standard % RH up to 95 up to 95

    FAQ

    Do any components, such as sensors or shelves, need to be removed prior to the high-heat decontamination cycle being initiated?

    No incubator components, including sensors and shelves, need to be removed. They are all designed to tolerate the heat.

    SHOW MORE SHOW LESS
    SALE

    select from options below to see SKU

    Green Leaf
    All shipments originating from Laboratory Supply Network are carbon neutral!

    Do you need assistance?

    We have experts standing by to assist you with your purchase. Call now at +1 603-652-1395 or contact us by clicking the button below.

    Customer reviews

    No reviews yet

    CO2Cell Incubators Accessories