All

To convert a Model 2000 to a Model 2050.

To convert a Model 2100 to a Model 2150.

Caster Platform available for the SCO5W, SCO6We, SCO5A, SCO6Ad,SCO31, SCO40, or SCO58

Caster Platforms for the SMI6, SMI7, SMI31, or SMI39

Caster Platforms for the SRI20P(F) or SRI21D

Mobility assistance or Space saving options for ISS Series Shakers

Easy monitoring and documentation, 170L, CO2 incubator, up to 50°C

Block designed for variable sized samples, one block holds 9 tubes in a combination of 1.5, 15, and 50mL sizes.

Conditioned chambers for reproducible simulation of climatic conditions 4-42 cu ft, up to 99.9°C

Co2 Regulator Assembly With Fitting and Tubing

CO2 regulator (connects to CO2 tank)

CO2 Sensors for GC Plant Growth Chambers. Allow CO2 control up to 5000 ppm.

Aluminum blocks for 15 or 50mL conical tubes and maximum heat retention.

Copper Shelf Kits for the SCO6Ad, SCO6We, SCO5W, SCO2W, SCO5A, or SCO10A

For 170 L incubators

Darkening window shade

Platforms with pre-installed max capacity 250mL or 500mL clamps

Platforms with pre-installed max capacity 250mL or 500mL clamps

Platforms with pre-installed max capacity 250mL or 500mL clamps

Integrated with controller for audio and visual alarm

To catch accidental spills, for universal platform M1250-9902

Increase total segments within each program from 2 to 8 segments.

Refrigerate, Incubate, Rotate, Rock, Stir all in one compact unit. 1-35 RPM, 4-75°C

Highly uniform CO2 atmosphere, fast recovery, up to 50°C, 170L

Test tube rack in sizes: small; 30 × 8 × 12.9 cm, medium; 36 × 8 × 12.9 cm, large; 45 × 8 × 12.9 cm

Connection via Ethernet to the users network.

Erlenmeyer, Lauber Thomson, & Fernbach flask dedicated platforms

Powerful temperature regulation by thermodynamic spiral air flow cooling and heating 0°C to 99.9°C

Adjustable angle, custom tilt holder includes removable plastic rack, for easy transport from work area to shaker

Easy attachment to platforms. Available for 3 test tube rack sizes and 50mL centrifuge tubes.

CO₂ or O₂ regulators for SureTherm™ CO₂ Incubator Series

No computer required. Remote status monitoring by mobile phone for up to 4 units.

GTS Ratcheting Clamp, GTS Flask Clamp, GTS Adhering Mat, or GTS Non-Slip Platform (for low speed)

Racks constructed of PVC coated steel. Available for microtubes, test tubes, and centrifuge tubes.

Heavy-duty platforms are recommended for shaking full loads of flasks, 1 L and larger, containing more than 20 % volume

Hepa-filters available in a H13 forced air (active) version or a H14 (passive) version

Compact design safely allows unattended temperature-controlled (heated & cooled) operation

Allows unattended temp-controlled to 80 °C operation up to 44 lb max load.

Accessory

In-Line Gas Hepa Filter

For all gases

Optional shelf for Petri dishes, microplates, etc.

Heat, rotate, rock, and shake all in one compact unit. 3-35 RPM, 28-75°C

Two jacket design with special air distribution ports 0.8-25 cu ft, up to 99.9°C

Thermal spiral air flow for optimum heating up to 99.9°C, 0.8-25 cu ft.

3 inner glass doors on 50L model. Important for Tri Gas models to reduce loss of conditions.