TH-PE Temperature and Humidity Chamber

Category Environmental Chambers
Manufacturer Jeio Tech
Country of manufacture South Korea
Overview

The best choice for the limited laboratory space! Tabletop chamber is beneficial for space efficiency.
Models: TH-PE-025/065/100

Control range
Temperature range from 0 to 120°C Humidity range from 30 to 95% RH

Performance

  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Uniform temperature and humidity control guarantees reliable test result.
  • Air-tight door closure with perfect sealed packing.
    • - Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
  • Maintenance of water supply is easily performed.
    • - Water level condition is easy to check by the water level indicator on the front control panel.
  • Water supply during operation is also available for long term test purposes.
  • Direct water system provides user great convenience when performing long-term tests. (optional)

Safety

  • Built in door lock with a key.
  • Automatic shut off after overheat alarm.
  • Low and empty water level alarm.
  • Power supply leakage breaker.
  • Over current protection.
  • Open door alarm.

Convenience

  • Compact design and quite operation.
  • Three different size models are available to suit user’s need.
  • Corrosion resistance stainless steel chamber.
  • Operating condition is clearly noticed by front LED indicator.
    • - Three different colored lights show each status of running, stop, and power off condition.
  • Clear observation of samples.
    • - Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
  • Cable port for introduction of external probes or wires.
    • - 50mm diameter cable port comes standard on the left side of the unit.
    • - Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
  • Two type of stands for space-saving. (optional)
    • - Single stand with a drawer provides enough storage space.
    • - Two step stand accepts loading two units to save limited space.
  • User friendly LCD controller.
    • - Colorful interactive touch type LCD controller.
    • - Set point temperature and present temperature are clearly shown together on display.
    • - Sufficient programmable control support.
    • - Operating progress can be shown in graph mode for better data understanding.
    • - Automatic start/stop can be programmed for unattended operations.
    • - Display indicates abnormal temperature changes or power failures.
    • - Selective bilingual language support. 
  • (Korean / English or English / Chinese, selectable only when placing an order)
    • - Temperature and other operating parameters can be recorded using a six channel digital recorder.(optional)

Computer interface

  • RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
  • Program patterns are simple to set with the use of our software.
  • Easy to check status of real-time operations. Graph data supports easy understanding.
  • Storage and documentation of programs.
  • Data with saving capabilities in excel and text format.
  • Storage of program information, backup of value settings, recovery, and temperature values.
  • RS-232 communication port as standard offer.
        Description No
        Programmable pattern capacity 100
        Pattern repeat time 999
        Part repeat time 255
        Max. segments per a pattern 100
        Available max. segments* 2000
        Programmable process time per a segment 0 to 99 hr. 59 min.

        * Even though the max. segments per pattern are 100, the total available segments are up to 6000 not 10000, therefore arrangement of the number of segment and patterns will need to be done properly.

        PLEASE NOTE: All Jeio Tech environmental chambers are manufactured to order. A lead time of approximately 12 weeks should be expected.

        Some accessories are factory install only and must be ordered at time of Incubator purchase for factory installation at time of manufacture. 

         

          Key Attributes
          Cu ft. 0.9, 2.3, 3.5
          Max Temp 120°C
          Min Temp 0°C
          Temp Uniformity ± 0.3°C
          Interior Outlets No
          Alarms Yes
          Datalogging Capable Yes
          Warranty (years) 1 (2 years after submission of warranty registration card)
          Site Benchtop
          Weight (lbs) 176, 242, 268

           

          Manufacturer Specifications
          Model TH-PE-025 TH-PE-065 TH-PE-100

          Chamber volume (L / cu ft)

          25 / 0.9

          65 / 2.3

          100 / 3.5

          Controller

          Program controller (LCD type)

          Temperature

          Range (℃ / ℉)

          0 to 120 / 32 to 248 without humidity
          15 to 90 / 59 to 194 with humidity

          Fluctuation 1) (±℃ / ℉) at 25℃ / 60%RH

          0.2 / 0.36

          0.3 / 0.54

          0.2 / 0.36

          Variation 1) (±℃ / ℉) at 25℃ / 60%RH

          0.3 / 0.54

          Time

          Heating

          - without humidity (min.) from 0℃ to 120℃

          40

          Cooling

          - without humidity (min.) from 20℃ to 0℃

          30

          Humidity

          Range (%RH)

          30 to 95
          ※ See feature page for more detailed humidity range check.

          Fluctuation 1) (±%RH) at 60%RH / 55℃

          1.6

          0.4

          0.5

          Variation 1) (±%RH) at 60%RH / 55℃

          3.0

          Refrigeration

          System

          Mechanical single stage refrigerator system (air-cooled condenser)

          Refrigerant

          R-404A

          Water tank

          Capacity (L / cu ft)

          7.5 / 0.26

          10 / 0.35

          14.5 / 0.51

          Water quality

          pH6.2 ~ 7.2, Electrical conductivity 20℃ / cm to below

          No. of wire shelves (standard / max.)

          2 / 7

          2 / 10

          2 / 10

          Distance of between shelves (mm / inch)

          20 /1.6

          20 /1.6

          20 /1.6

          Max. load per shelf (kg / lbs)

          25 / 55.1

          25 / 55.1

          25 / 55.1

          Permitted total load (kg / lbs)

          65 / 143.3

          65 / 143.3

          65 / 143.3

          Dimension (W×D×H)

          Interior (mm / inch)

          348×220×353/

          13.7×8.7×13.9

          398×330×498/

          15.7×13×19.6

          498×390×538/

          19.6×15.4×21.2

          External (mm / inch)

          611x878x911/

          24.1x34.6x36.2

          660x1048x1056/

          26.0x41.2x41.6

          761x1108x1096/

          29.9x43.6x43.1

          Viewing window (mm / inch)

          220×300 / 8.7×11.8

          Net weight (kg / lbs)

          80±5 / 176±11

          110±5 / 242±11

          130±5 / 286±11

          Cable port

          Basically one hole provided / Ø 50mm (2”)
          Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2”)

          Interface port

          Basically RS-232C [RS-485-optional]

          Electrical requirements (230V, 1hp, 60Hz) 9.6A 12A 14.4A
          Cat. No. AAH82211K AAH82221K AAH82231K




           

           

          SHOW MORE SHOW LESS
          SALE

          select from options below to see SKU

          Green Leaf
          All shipments originating from Laboratory Supply Network are carbon neutral!

          Do you need assistance?

          We have experts standing by to assist you with your purchase. Call now at +1 603-652-1395 or contact us by clicking the button below.

          Customer reviews

          No reviews yet

          TH-PE Temperature and Humidity Chamber Accessories